Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
So something bad happened to my starter, causing the cotter pin at the end of the drive assembly to disintegrate and the end nut to strip out. (Actually, I'm guessing the nut was stripped first, which then spun and broke the pin.)
Anyway, it looks like I can order a new nut, but Moss shows a spacer washer (circled below, not available) that I also seem to be missing. I could believe it dropped into the bell housing behind the flywheel (I was fishing parts out with a magnet), but the parts diagram at AH Spares doesn't even show such a washer.
Does anyone know if that's an actual, needed piece? And, if so, any idea if it's a special shape (like could I use a flat washer)?
Thank you!
Anyway, it looks like I can order a new nut, but Moss shows a spacer washer (circled below, not available) that I also seem to be missing. I could believe it dropped into the bell housing behind the flywheel (I was fishing parts out with a magnet), but the parts diagram at AH Spares doesn't even show such a washer.
Does anyone know if that's an actual, needed piece? And, if so, any idea if it's a special shape (like could I use a flat washer)?
Thank you!
