• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Stag Stag clutch slave cyl

Share this page

F

fogdot

Jedi Hopeful
Offline
Does the slave cylinder mount with the shoulder of the cylinder forward or aft of the engine flange?
I can't get a clear picture from the maint manual. Mine is mounted forward, but leaves some slop in the clevis rod. An aft mounting would limit the travel of the piston in the slave cyl.
 
If memory serves, mine is mounted aft, so you have to disconnect the hydraulic line to remove the slave from the flange (or the engine from the car).

Although some of the drawings in the ROM are wrong (one even shows the clutch lever on the wrong side), there is one in the section on engine R&R that shows the clutch slave cylinder and it's mounting.
 
Back
Top