Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I need to know who makes the best release bearing for 1275 sprites. I've replaced 2 in the last 2 years with almost no driving miles. About 100 mi on the first and 400 on the second. Both were from VB. On the 2nd one I built my own push rod so I know it was adjusted correctly. Defective parts? We owned a sprite in the 60s and never had a problem with this, drove it many miles and it was fine when we sold it in l969. Any help/hints will be appreciated. JSM
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
sprite clutch release
- Thread starter owby
- Start date
Share this page
Gerard
Luke Skywalker
Offline
It's hard to know who makes/supplies the reproduction stuff these days. You figure most of it some from the same suppliers. AH Spares in the UK is known for having better quality replacement parts, so I would check with them and see what you can find out.
I've been putting 5 speeds in everything, so I haven't bought one of those in years.
https://www.ahspares.co.uk
I've been putting 5 speeds in everything, so I haven't bought one of those in years.
https://www.ahspares.co.uk