• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Spitfire Spitfire - Rear Track Width Identification Help

dklawson

Yoda
Offline
I purchased a set of stainless braided brake hoses off eBay for our '72 project Spitfire.

The seller/vendor has written me asking if I have the "wide track" or earlier type rear end on the car so he can ship the correct hose set.

I'm unfamiliar with this. What can I measure or look for on the car that would tell me if it has a wide-track or early rear end?

Thanks in advance.
 
If there is a bracket on the back of the brake backing plate to which the brake hose is joined to a pipe leading to the wheel cylinder, that's the "wide track" setup. If your hose goes straight to the wheel cylinder, it's the "narrow track" setup.
 
Back
Top