• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Spitfire SPITFIRE FRONT HUB SEAL

Share this page

M

machinemd

Jedi Hopeful
Country flag
Offline
JUST ONE SIMPLE QUESTION....FOR AN EXPERIENCED MIND. I'M READY TO REASSEMBLE THE FRONT HUB BUT NOT SURE THAT IT WAS TOGETHER CORRECTLY TO START WITH AND CAN'T TELL FOR SURE BY THE HAYNES OR BL MANUALS OR CATALOGS. I FOUND IT WITH THE FELT DRY & LOOSE AGAINST THE BACKING PLATE/VERTICAL LINK, AND THE EMPTY METAL PART OF THE SEAL PRESSED INTO THE HUB. OF COURSE THE NEW SEAL HAS THE FELT GLUED INSIDE THE METAL CAP. AND 25+ YEARS AGO, LAST TIME I DID FRONT BEARINGS/SEALS, I REMEMBER SOAKING THE SEAL IN OIL AND PRESSING IT FELT FIRST INTO THE HUB & FLUSH. WHAT IS THE CORRECT ORIENTATION & LUBRICATION?

THANKS, STEVE
 
Back
Top