• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Spin on oil filters

Share this page

jlaird

jlaird

Great Pumpkin
Offline
Puroletor L10028

Bosch 3330

Fram PH966B

Wix 51348

NAPA Gold 51348

Delco PF53

Mobile M1 102

Had to go with the DELCO one as it was on the shelf.

Some goop in the pan, not a lot, just a few very small metal fileings as expected.
 
Bosch 3330

Fram PH966B I show PH3614

Wix 1348 its 51348

NAPA Gold 51348 same filter as Wix above
NAPA Standard 1348

Delco PF53 ok

Mobile M1 102

Carquest 85348

Group 7 = V241

This basically is a late Chrysler products fit..


""""""Some goop in the pan, not a lot, just a few very small metal fileings as expected. """"""""

well JL, next time try for NO filings.....Palmolive dish soap and a lot of scruba-duba.
 
I use a Fram 3600. I think the spin on part is 3/4".
 
I prefered to keep the old canister type filter. Its not like I am going to be changing oil once a month or something. Probably more like once a year and If I spill any oil that area will probably need to be washed anyways.
 
I don't know Kim, I lost faith in that old thing when the O-ring went on me once on I-95. Give me a spin-on any day!!!
 
the wix works well!
I bought a different brand I think it was STP and it hit the engine mount

cheery
steve
 
Give Kim about 2 oil changes and he will be asking just where he can get the spin-on adapter!!
 
I have a related topic where I need the help of those reading this thread.

If you have a canister type filter head (off the car) would you please measure the "depth" of the mounting boss? I need to know the distance from the surface that bolts up to the block to the surface under the head of the bolts. It should be something close to 2.9" but I don't have one to measure.

Thanks in advance.
 
Billm said:
Give Kim about 2 oil changes and he will be asking just where he can get the spin-on adapter!!
Click to expand...

Who don't know that's right /bcforum/images/%%GRAEMLIN_URL%%/smile.gif
 
No doubt, Hap.
I like the Fram because of that handy little grip stuff. /bcforum/images/%%GRAEMLIN_URL%%/smile.gif Making life just a little bit easier.
 
Doug, I measured 2, both Purolators. I got 2.911" on one, and 2.920" on the second. I would imagine the Tecalamit would measure the same, but couldn't find one.

Jeff
 
Back
Top