Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
One of my race cars has a spridget rear axle with Winner's Circle double-bearing hubs. I am experiencing the usual leaks and I need to sleeve the axle stub before installing a new lip seal, etc.
I have done this successfully in the past using a speedi-sleeve but I cannot determine if I used pn# 99172 or 99174. The only difference is the width of the sleeve but if the seal is too wide it will interfere with the inner hub bearing. and if too narrow it will probably not allow the lip seal to work.
I see references to both pn's on various websites and would appreciate anyone telling me which one they have used successfully with the DB hub. Thanks in advance.
I have done this successfully in the past using a speedi-sleeve but I cannot determine if I used pn# 99172 or 99174. The only difference is the width of the sleeve but if the seal is too wide it will interfere with the inner hub bearing. and if too narrow it will probably not allow the lip seal to work.
I see references to both pn's on various websites and would appreciate anyone telling me which one they have used successfully with the DB hub. Thanks in advance.