• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Source for distributor drive peg? Mystery Part?

Share this page

Csarneson

Csarneson

Jedi Hopeful
Country flag
Offline
9E7ECFFC-D6F6-416C-842F-BFA6DF6936B9.jpg
Question #1: While trying to set up my distributor for the first time I finally realized that the drive shaft pin had sheared. Neither Moss nor AH-Spares offers it. Can I use a simple roll pin from the hardware store?

Question #2: what is this part? I’m at the end of my basket case engine rebuild and I have no idea but it seems like it could be important.
D4374061-702C-4154-BEE5-2A7F9723F252.jpg9B486E6E-8A32-4B16-AA65-9B6A4407B1B6.jpg
Many thanks!
 
Last edited:
Attachments not showing up
 
It’s steel so I don’t think that’s it unless the rubber rotted away which is theoretically possible.
 
On other BMC cars I have seen "cups" like that used to retain felt seals.
 
On question #2, I'm not sure if that's an engine part; looks a lot like an adjustable steering column dust cover cap (see Moss pic. GONZO
667-670_1JPG.jpg
 
gonzo said:
On question #2, I'm not sure if that's an engine part; looks a lot like an adjustable steering column dust cover cap (see Moss pic. GONZO
Click to expand...

Oh my gosh that's it!!!!! I'd have never looked in the steering section of the manual. It was just tossed into the mouse-eaten cardboard box with all of the other miscellaneous parts. I've long assumed it was an engine part. The best part is that I haven't forgotten a part in my engine build!!!! Thank you so much!!!!!
 
Back
Top