• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

source for a posidrive bit...what else?

whit_iii

Member
Offline
All right. Now that I know I need a posidrive bit, where does one get it?

www.lara.com $1.25 per bit
www.autotoolexpress.com 100 piece for $15
www.craftsman.com (cannot find)
www.wihatools.com $4.50 per bit

Not sure which to buy. $15 seems too good a deal, $4.50 bit vs. $1.25? Then when you look at the lara.com site there are any number of bits.

Slotted Phillips Phillips TR Combo Pozidriv Square recess Square recess TR Torq-Set Tri-Wing TORX® TORX TR TORX Plus® TORX Plus TR TORXALIGN® Hex Hex TR Spanner Clutch Nut setter for Nintendo (don't think I need this) Penta-Drive Quadrex Spline Tri-Groove Triangle recess One-way screw remover Oval head screw remover Other bits & adaptors

I will have to look through my books again to see if references are made to any of these now that I know what I am looking for, but jeez...where does it end or where to begin?

I know I have asked this before, but thoughts on where to get these items?
 
McMaster-Carr sells them. I can't remember what I paid, but it wasn't exhorbitant for a package of 10 #2 bits.
Snap On, and Mac Tool also sell complete screwdriver sets.
Jeff
 
We have 5 different sizes, at $1.00 each. I thought i would let you know! Click on our advertising link above!
British Tools and Fasteners
 
Back
Top