• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Soft brake pedal on BJ8

Share this page

T

tomnanney

Jedi Hopeful
Country flag
Offline
The brake pedal on my car won't pump up. I've checked for leaks on the wheel cylinders, around the master cylinder and around the booster. Everything appears dry! Could the master cylinder be bad? Any ideas to try to figure out what's wrong? Thanks!
 
Most likely...your master cylinder is toast! Crawl under your dash, pull back the rubber dust boot on your brake master cylinder and check for leakage there! Needs a rebuild kit! And while your at it, you may as well rebuild the clutch master as well as long as the carbs are off! Michael, IL.
 
Last edited:
before you go crazy if the car sat for a while see if the piston is stuck first i bet thats what it is
 
rjc157 said:
before you go crazy if the car sat for a while see if the piston is stuck first i bet thats what it is
Click to expand...

Well, If the car was sitting for awhile and the piston is stuck.... Its even more reason to:hammer: rebuild that master cylinder pronto! Before he takes to the open road! That dot 3 is not very kind to rubber, or anything else for that matter.
 
Last edited:
Back
Top