• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

So, what to do with the bonnet?

Share this page

It looks tight JP but if you close the bonnet carefully, I think you can get it latched :whistle:
 
Gliderman8 said:
It looks tight JP but if you close the bonnet carefully, I think you can get it latched :whistle:
Click to expand...

:hammer:
 
:lol:
 
So much fail:

uyg7o.jpg


So much win:


epm58n.jpg
 
Cut the battery tray out and move the engine back at least if your going to stuff a massive lump like that in it.
 
yes it needs re-engineneered (sure that is not proper)
move motor back as mentioned, and drop down then custom intake and exhaust. move battery to rear, rig up a radiator, cut up transmision tunnel. then spend 5k to get the 2300 to put out some real horsepower. then a different rear end.
or transplant a b210 A15 with 5 speed and be done.

started this same project 10 years ago. Had all the parts gathered and dropped the 2300 in there and had a moment !! the next day I took it all to wrap metal yard. figured I would save myself a lot of money and wasted youth
 
That sprite with the twin cam is just amazing. The red one with the pinto motor, well, that's just wrong
 
Twin cam engine is a Jaguar. That is one AMAZING car!
 
Back
Top