Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Some time ago I got a small 1" or so tear in my top where it goes over a bow. I've tried black tape inside and out but it falls off after a few days. What's the best way to patch the tear? The top is a bit tight but otherwise in fine shape although it's 19 years old but always garaged.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
TR6 Small tear in convertible top
- Thread starter pdplot
- Start date
Share this page
tomshobby
Yoda
Offline
We purchased our TR6 9 years ago and the top had tears on both sides because of improper folding when it was lowered. A good friend was in the upholstery business for many years and recommended this. A product named "VIP". All these years and nearly 60,000 miles later and it still looks as good as the day the repair was done.
Attachments
Geo Hahn
Yoda
Offline
That looks like it is worth a try. I had been using a patch made from Gorilla Tape which holds well but looks more obvious.
BTW -- The name of the product is 'VLP':
https://www.amazon.com/Performix-075815100016-Leather-Vinyl-Repair/dp/B000PS6N4E
Success may depend on how much stress the torn area is subjected too - in my case it is a spot that gets pulled pretty tight.
PS - Looks like they may have it at The Home Depot.
BTW -- The name of the product is 'VLP':
https://www.amazon.com/Performix-075815100016-Leather-Vinyl-Repair/dp/B000PS6N4E
Success may depend on how much stress the torn area is subjected too - in my case it is a spot that gets pulled pretty tight.
PS - Looks like they may have it at The Home Depot.
Darrell_Walker
Jedi Knight
Offline
This won't make a pretty repair, but it has always held up for me when I was a poor college student. I would stitch up the tear with thick thread. Nothing fancy, just a big whip stitch. Then smear RTV (I had a black top) over the sewn-up cut.
dklawson
Yoda
Offline
I have used VLP and similar vinyl glues to repair tears in many vinyl parts... but not a top.
I agree with those above who show a patch applied to the inside applied with VLP. After the VLP has dried I have used a sewing awl to stitch the patch. Where moisture has been a concern I have smeared a thin film of VLP over the thread to waterproof the area.
I agree with those above who show a patch applied to the inside applied with VLP. After the VLP has dried I have used a sewing awl to stitch the patch. Where moisture has been a concern I have smeared a thin film of VLP over the thread to waterproof the area.
