-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Shock absorber conversion
- Thread starter hmj6854
- Start date
Share this page
Offline
twas_brillig
Jedi Knight
Offline
We had the Putzke Fahrpass shocks and polyurethane bushings installed along with trunnion bearings and adjustable camber plates. Alignment now has slight negative camber.
The shop that did the work commented that it was the best handling, best riding, Healey that they'd ever had; an acquaintance who is rebuilding his BJ8 made the same comment.
Cons? None. My recollection is that the shock kit is completely reversible, so don't throw out your lever arms. The camber plates are welded, but also pretty inert and invisible. Doug
The shop that did the work commented that it was the best handling, best riding, Healey that they'd ever had; an acquaintance who is rebuilding his BJ8 made the same comment.
Cons? None. My recollection is that the shock kit is completely reversible, so don't throw out your lever arms. The camber plates are welded, but also pretty inert and invisible. Doug