Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
I recently acquired an MGA 1600 Mark II from the original-owning family, and I'm trying to compile a reasonably accurate tool kit. The last items still needed are the wood-handled Phillips screwdriver and three of the four KING DICK "box spanners" (that might also be called "tube spanners").
These are reportedly original screwdrivers:
They are scads of wood-handled screwdrivers available on eBay and elsewhere on the Internet, but virtually all say MADE IN USA or have some other spoiling words or logos.
These are the four box spanners:
The large one is reportedly 8 inches long, and the other three are marked:
7/16 x 1/2
9/16 x 5/8
11/16 x 3/4 (I have this one)
Thanks for any help to locate and purchase the needed items.
These are reportedly original screwdrivers:
They are scads of wood-handled screwdrivers available on eBay and elsewhere on the Internet, but virtually all say MADE IN USA or have some other spoiling words or logos.
These are the four box spanners:
The large one is reportedly 8 inches long, and the other three are marked:
7/16 x 1/2
9/16 x 5/8
11/16 x 3/4 (I have this one)
Thanks for any help to locate and purchase the needed items.