Sebring Front Valence

[DJThom]

I have decided to shed my rubber bumpers in favour of a Sebring front and rear valence. This past weekend at the VSCDA and MG-Racers event at Mid-Ohio I observed two types.

The first type is what is commonly available from the usual suppliers. It attaches like the OE valance from the front with exposed fastener heads.

The second type were alloy custom fabricated that had a lip on the upper edge parallel to the ground when installed. This is the same feature the rear valences have and enables them to be attached by screwing vertically from above or below such that the fasteners are hidden.

Does anyone know a source for the second type (metal or fiberglass)? Many thanks
Darren

 

[Hap Waldrop]

Moss sells the the Fiberglass one, John Targett sells the aluminum one.

 

[DJThom]

Thanks. do you have contact info for John? I believe the moss valence is like the first type I described above which does not have the lip enabling hidden fasteners. However, I emailed their tech services to find out for sure...

 

[Steve_S]

MG Motorsport sells aluminum. I have one on my GTS with added driving lamps.

 

[BritishV8]

Quote: "do you have contact info for John?"

Just go here and scroll down... https://www.britishv8.org/sponsors.htm

 

[DJThom]

I'm going ahead and ordering the fiberglass valence that seems to be the most pervasive in the market. I'm going to add tabs along the top that can be used to attach it without fasteners being visible.

I'll document progress in this thead for those interested...

 

[racetearoffs]

https://www.morspeedperformance.com cool stuff for retro fit

 

[DJThom]

yes, I'm getting a rear valence there with the license plate cut out. He doesn't make the standard front valence