• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Seats

Share this page

61Alpine

61Alpine

Senior Member
Offline
I received a pair of Series IV Seats today from a friend. I am planning on redoing the seat covers.
Does anyone have tips for me to make this easier. Can a novice do a good job on his own seats. I have done everything else on the car so I figure I might as well do the seats too.
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by 61Alpine:
I received a pair of Series IV Seats today from a friend. I am planning on redoing the seat covers.
Does anyone have tips for me to make this easier. Can a novice do a good job on his own seats. I have done everything else on the car so I figure I might as well do the seats too.<hr></blockquote>

If you can find a supplier that sells seat covers already stitched, replacxement foams, etc. it isn;t bad (I did my EType seats that way). However, if you must start from scratch (can't buy a kit), then probably best to take it to a good upholstery shop in my opinion.

Basil
 
Sunbeam Specialties has what you need. They are in Los Gatos CA.Ph.# is 408 371 1642.Curt at Classic Sunbeam may also have them.
cool.gif
Still no snow.
 
I put the drivers seat in my car this morning just to test the fit. Way better than what I have. I can't believe the difference.
Rob
 
Back
Top