Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I 've seen one in a backyard. The paint is oxidized and it probably needs a complete resto. Looks solid enough on the outside. Havent had a close look yet. What would be a reasonable price to pay for one of these old saloons? Are parts still available? I'm assuming it's a 4 cyl.
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Rover P4 60 yard find.
- Thread starter karls59tr
- Start date
Share this page
Offline
The Rover 60 is a four-cylinder. Parts availability should be pretty good in the UK but body panels may be an issue. Good news there is that the panels are so thick that you may not need to replace any.
For something in need of a complete rebuild you shouldn't pay much. I'm thinking a couple of hundred.....
For something in need of a complete rebuild you shouldn't pay much. I'm thinking a couple of hundred.....
Offline
They used the Land Rover (yes, the 4X4) four-cylinder engine for the 60 and the later version, the 80 so there must be a few of those knocking around. Chassis, body, panels and trim were all as for the the six-cylinder cars. A word of caution thou, these engines were a little "rough" (not the smoothest running motor) and the poor things must have been awfully underpowered, as well.