• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Rod/piston ID

Share this page

R

Ray Smith

Jedi Hopeful
Offline
I need help identifying what engine the following rod and piston will fit. The rod is a MOWOG AEC790S. The piiton has AEC 800 R1 Front on the crown. Will this rod and piston fit a 63 BJ7?

Thanks,

Ray Smith
 
The BJ7/8 Parts Manual list an 8G2339 as the standard connecting rod.

Pistons are only listed as "sets" with rings, wrist pins and circlips. The standard number is 12B115903 or 12B115906 for 29K series engines.

Additionaly, the Part Number Index lists many "AEC" parts, but not the two you have asked about.
 
Back
Top