• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

General TR Rocker cover identification please.

Share this page

Hamish Racing

Hamish Racing

Jedi Knight
Silver
Country flag
Offline
Does anyone know if these rocker / valve covers are standard or after market accessories

could be Standard Triumph era
Or swallow Doretti ( that’s what the under hood/bonnet pic I found)

I have taken a chance on eBay for my 3a as it looks period.

help welcomes what would the 3 holes be used for ?
2 one side one the other

if it fits I can block these up.
H
 

Attachments

  • AC9B1A94-DD45-486C-A10F-7772CFF2E9C0.jpeg
    AC9B1A94-DD45-486C-A10F-7772CFF2E9C0.jpeg
    134.2 KB · Views: 166
  • CF713E3F-CB75-4615-9E16-4ACE775821C6.jpeg
    CF713E3F-CB75-4615-9E16-4ACE775821C6.jpeg
    160.2 KB · Views: 169
It's not Triumph, but it looks like it will work. You will need a vent in the cover, as the Triumph uses a road draft crankcase vent system, which needs to suck in the valve cover and out of the draft tube on the bottom rear left side of the block.
 
Back
Top