• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Rimmerbros Part

honey badger

Freshman Member
Country flag
Offline
I hope the following is an appropriate post. I am thinking about oredering a rear Valance(apron) for my TR3 B from Rimmerbros. I have never order from them before. I am looking for members experances
V/r
HB
 
I have ordered thousands of dollars of stuff from them. No problems and it usually arrives in about 5 days. You will have to pay a customs fee if you order over ABOUT $200. Small orders are shipped via Royal Mail. No customs fee if that is used. Larger orders usually shipped by DHL (at the time I ordered a few years ago). I always let RB decide how to ship.
 
Never a problem with Rimmer Bros. They are a reputable company to deal with.
 
Like the others, they seem to be hit or miss with me. I ordered a set of seat pans that were just plain horrible...at $300. I also got used tapered lock plates for my TR2 wires that were also worn out...at $320. Other parts I ordered from them were fine.
 
My TR 8 member uses them a lot never a bad word. I am trying revingtonTR in UK C19 hit them hard and I think it may be the same with Rimmers. Madflyer
 
Let us know how it looks when you get it. Did you check out TRF rear apron It seems they have 2 different versions of it?

David
 
I hope the following is an appropriate post. I am thinking about oredering a rear Valance(apron) for my TR3 B from Rimmerbros. I have never order from them before. I am looking for members experances
V/r
HB
Rimmer Bros have become my first choice. That said, I would have them confirm that the valance comes with the NLA closing panel on it. I got one a few years ago (and not from Rimmers) that did not. It is fairly easy to fabricate (if there is enough of the old one left to copy) but a bonus if it were on the apron. I don't about the other suppliers either but make sure of an apples to apples comparison.

Tom
 
Back
Top