Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Jim_Gruber
Yoda
Offline
OK I know 4 standard screws in there to get the Column Surround apart. I can't remember however the trick to get the back screws out without dropping / unbolting steering column. Looks like a screwdriver on a spring or something like that is needed to get at them. Ideas?
Trying to get at TS Switch to tighten up and see if I'm getting juice up there. Issue still from last week when Grandkids were in Bugsy in the garage fighting over who got to drive and TS now don't work.
Might be time to head to Sears ands see if I can spot a handy dandy tool to get in there without dropping the column.
Fun to have the little guys over 8,9,10,11 just Bugsy can't stand the abuse. Now both hte TS and Wiper switch have loosened up and need to be tightened. Might have lost my ground although Wipers, Horn and flashers still work enthusiastically/.
Trying to get at TS Switch to tighten up and see if I'm getting juice up there. Issue still from last week when Grandkids were in Bugsy in the garage fighting over who got to drive and TS now don't work.
Might be time to head to Sears ands see if I can spot a handy dandy tool to get in there without dropping the column.
Fun to have the little guys over 8,9,10,11 just Bugsy can't stand the abuse. Now both hte TS and Wiper switch have loosened up and need to be tightened. Might have lost my ground although Wipers, Horn and flashers still work enthusiastically/.
