-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
recommendations needed for steering wheel cover
- Thread starter angelfj1
- Start date
Share this page
Cottontop
Jedi Warrior
Offline
About 10 years ago, I reduced the diameter of my big Healey steering wheel from 17" down to 13".
After I built up the rim diameter/thickness to 1.25" using lacing cord and VERY firm foam rubber, I installed a dark brown, lace-on, one piece, leather cover from J C Whitney.
It looks very much like what is on the Wheel Skins web site.
Here is another view -
I used a two-cord baseball stitch on the ID of the wheel, not the overhand loop that most use on the cheep perforated plastic covers.
When the front wheels are straight ahead, the spoke is UP to allow better viewing of the Tach & Speedo. The cover joining stitching is at the bottom of the wheel.
If you want more details, contact me at timm@healey.org.
After I built up the rim diameter/thickness to 1.25" using lacing cord and VERY firm foam rubber, I installed a dark brown, lace-on, one piece, leather cover from J C Whitney.
It looks very much like what is on the Wheel Skins web site.
Here is another view -
I used a two-cord baseball stitch on the ID of the wheel, not the overhand loop that most use on the cheep perforated plastic covers.
When the front wheels are straight ahead, the spoke is UP to allow better viewing of the Tach & Speedo. The cover joining stitching is at the bottom of the wheel.
If you want more details, contact me at timm@healey.org.