I'm planning to rebuild the front seats on my '62 BJ7 because the upholstery kit installed 25+ years ago was done incorrectly using glue and screws, etc. I want to use as much of the "as original" hardware and materials (e.g., clips and fabric) as possible - unless there's a better way.
If someone could provide 2 or 3 bottom-view pics of both the front seat back and bottom to help determine clip / fastener locations and the number of clips used to install the fabric to the seat. I will be replacing with a UK-sourced leather seat kit. Much thanks, Gonzo
If someone could provide 2 or 3 bottom-view pics of both the front seat back and bottom to help determine clip / fastener locations and the number of clips used to install the fabric to the seat. I will be replacing with a UK-sourced leather seat kit. Much thanks, Gonzo