• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A rear wheel cylinder

Share this page

S

sp53

Yoda
Country flag
Offline
The metal end of this rear wheel cylinder comes off somehow, perhaps a push out with a brass drift or a push up with a brass drift. Any ideas? I am afraid I will break it. The clip I guess holds in place the E-brake arm also.

Steve
 

Attachments

  • DSCN1354.JPG
    DSCN1354.JPG
    3.3 MB · Views: 94
It should just slip off...it is just a dust cover for the piston underneath. You may have to remove the assembly first, by removing the bolt on the back of the plate.
 
Back
Top