TR4/4A Rear Turn Signals are Blinking In Reverse

[KVH]

My front turn signals work fine. My rear signals are blinking in reverse. Left goes when it should be right, and vice versa. I know this is an old refrain, but I've searched everywhere for a solution. Is there a pair of connectors perhaps hidden behind the gas tank panel that I can just switch? I'm not finding wires anywhere else that would be candidates for a fix. Thanks all.

 

[Andrew Mace]

It pretty much has to be that simple. I don't know where the connection(s) would be; all I can suggest is that you follow the green-with-white-tracer wire back from the RH lamp until you find a connection. Or follow the green-with-red-tracer wire back from the LH lamp until you find a connection.

 

[KVH]

Thanks, Andrew. I got it fixed finally. My switch apparently had the color coding reversed to how the wiring was installed in my car. For instance, the green/white wire was my right rear tail light, whereas on my switch the right tail lights were supposed to be the green and red stripe. I also then had to reverse a couple of wires up front near the front grill of the car. One thing is for certain – – this was trial and error and not any innate skill I possess. Thanks again.