Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hi Everyone
I am in the process of reconditioning my rear springs (clips, linings etc.), on my BJ7.
I noticed that the eyes for the bushings are two different sizes and my springs have two different style bushings.
But when I ordered the bushings, it called out 4 required, and of the same size (1" outer diameter).
My Austin Healey Service Parts List does as well.
Obviously, I'm not going to attempt to press in a bushing that is 0.150" too large.
Looking at the Moss website, I noticed that the same bushings for BJ8 springs, only calls out 2 required.
So here is my question, is it possible that someone put BJ8 springs in my '63 BJ7?
Does it sound like I described a BJ8 spring?
Thanks in advance for your input!
Cheers
Perry
I am in the process of reconditioning my rear springs (clips, linings etc.), on my BJ7.
I noticed that the eyes for the bushings are two different sizes and my springs have two different style bushings.
But when I ordered the bushings, it called out 4 required, and of the same size (1" outer diameter).
My Austin Healey Service Parts List does as well.
Obviously, I'm not going to attempt to press in a bushing that is 0.150" too large.
Looking at the Moss website, I noticed that the same bushings for BJ8 springs, only calls out 2 required.
So here is my question, is it possible that someone put BJ8 springs in my '63 BJ7?
Does it sound like I described a BJ8 spring?
Thanks in advance for your input!
Cheers
Perry
