• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Rear spring disassembly - BN1

Share this page

GeorgeC

GeorgeC

Member
Offline
I'm trying to disassemble my BN1 rear springs. Of course, I can't get the screws that hold the clamps to come loose. Are these screws available? I don't see a number for these in the parts list.
Thanks

Rear spring screw.jpg
 
My BN6 original springs have similar flathead screws which, on my car, are 1/4-28. Was never able to find exact replacements, but did find 1/4-20 and 5/16-18 flatheads at FMW fasteners:
https://www.fmwfasteners.com/

After removing the screw, you might be able to punch the area around the hole and re-thread it to 1/4-20. Or put a nut on the screw.
I'm currently running British replacement springs which use small bolts and nuts in place of the flathead screws.
 
Back
Top