• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Rear cowl part needed

Share this page

J

Jeff_68_Sprite

Freshman Member
Offline
On the 68 Sprite they changed the rear cowl to accomidate a lip that was covered with a plastic piece that the Tenex fasteners attached to for the top. The metal is pretty rusted on mine. Does anyone know of a source for this piece or have a good one on a junk car they would cut out? Any help appreciated.
 
Jeff,
I'm in SC too. Aiken to be exact. Have you looked at the Victoria British catalog yet? They have a ton of replacement panels. I plan on using them when I tear mine down for the "major" restoration. They don't have a catalog online but will send you one for free. I use them all the time and haven't had any problems. Just make sure you can't get it locally first. If you buy from them you will pay 3.00 for a 2.00 spark plug if you know what I mean. Still they have tons of hard to find stuff.
JC
 
Back
Top