Rain channel colour

[barnman]

Good evening chaps. Anyone with a colour for the rain channel on the BJ8.
Obviously its grey but can we narrow it down even to a modern counterpart that I can get in a "rattle can".

Thanks in anticipation,

Regards Alan

Also I have a tubular s/s 6 branch exhaust...any thoughts on exhaust wrapping?

 

[Patrick67BJ8]

Good evening chaps. Anyone with a colour for the rain channel on the BJ8.
Obviously its grey but can we narrow it down even to a modern counterpart that I can get in a "rattle can".

Thanks in anticipation,

Regards Alan

There’s an excellent match in Rustoleum. Unfortunately the PN has faded from my memory but someone will chime in with the number.

 

[dougie]

You want to use ANSI 61 Gray, https://www.lowes.com/pd/Rust-Oleum...Spray-Paint-Actual-Net-Contents-12-oz/3728109

There's you answer to exhaust wrap, https://www.xtremediesel.com/dei-bl...IKcaarNeacxbqAcM_yGh97z7BZ-YbVFBoCxjkQAvD_BwE

 

[barnman]

You want to use ANSI 61 Gray, https://www.lowes.com/pd/Rust-Oleum...Spray-Paint-Actual-Net-Contents-12-oz/3728109

There's you answer to exhaust wrap, https://www.xtremediesel.com/dei-bl...IKcaarNeacxbqAcM_yGh97z7BZ-YbVFBoCxjkQAvD_BwE

Thanks for all that, will look.

Regards Alan

 

[bob hughes]

Ah mine is rust alright - red rust. Having removed the rear shroud to get better access to replace the boot floor, I found that the drain channel was very rusty, after mild grit blasting it then became religious as well. The replacement that I had bought several years ago in anticipation of a change over was black, presumably a basic black primer. I can now sort out the correct colour once I either repair the old one or re profile the new one to fit.



Bob

 

[barnman]

The sentence reprofile certainly resonates ...nothing fits first off!