Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am almost ashamed to admit my ignorance here but I have a question on filling the shocks with oil. I have cleaned throughly, dried and replaced the valves, gaskets and now ready to place back on the car. The oil that did come out scared the neighbior cat away and the lingering smell I will never forget. My question being: do I simply fill them up and crank a few times and top off? In trade for advice I can share my trick on filling the gear box with your son's or daughters cheap drink bottle straw, a piece of duct tape and a gasket made of an old paper shop towell along with a normal funnel. Gotta laugh huh?...it worked and not a drop anywhere! I wish you all a happy day... Richard, 71 mgbgt
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
question on filling rear shock....[armstrong]
- Thread starter richardJr
- Start date
Share this page
BradHollister
Member
Offline
No need to be ashamed - I know not a damned thing about the good old lever shock, other than when its not working right.
If you have a trick for getting that pesky fill/check plug back in the transmission after filling, I'd be willing to learn about shocks. LOL (got lucky today - only took 5 minutes to fill 'er up)
Brad Hollister
'62 Midget
If you have a trick for getting that pesky fill/check plug back in the transmission after filling, I'd be willing to learn about shocks. LOL (got lucky today - only took 5 minutes to fill 'er up)
Brad Hollister
'62 Midget
Keoke
Great Pumpkin
Offline
Hi Richard,Yes you just fill it up with the proper shock oil and work the arm until resistance felt in both directions is the same, then top up if required and install the filer cap. Note; keep the shock in the vertical position after this and refit to the car.--Fwiw---Keoke
MGTF1250Dave
Jedi Knight
Offline
Aloha Richard,
Remember to allow a small air gap at the bottom of the filler hole. This is to allow room for the oil to expand as it heats up during operation. This is fairly easy to see with the shock off the car, but can be very difficult with the shock on the car. I have modified a plastic glue applicator (looks like a hypodermic needle and available in most home improvement stores) by cutting the "needle" length to be just below the bottom of the filler hole. I can use it to add oil to the shock, then suction any excess out.
Safety Fast,
Dave
Remember to allow a small air gap at the bottom of the filler hole. This is to allow room for the oil to expand as it heats up during operation. This is fairly easy to see with the shock off the car, but can be very difficult with the shock on the car. I have modified a plastic glue applicator (looks like a hypodermic needle and available in most home improvement stores) by cutting the "needle" length to be just below the bottom of the filler hole. I can use it to add oil to the shock, then suction any excess out.
Safety Fast,
Dave