• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Question - firewall gromits

Share this page

jlaird

jlaird

Great Pumpkin
Country flag
Offline
Anyone figure out what size gromets we need for the firewall? I need all but the one for the wire loom.

I see VB has em and even gives sizes but but but.
 
Wouldnt you need the size that fits the hole you are plugging???
 
Yep, for sure, and that is the problem. Moss does not say what the sizes are, but then VB does.

Sent an email to Ed to see if he has these on the shelf but think he must be off playing some where.
 
Re: Question - firewall grommets

Are the sizes online or in VB catalog? I see part# and location, but no info regarding size.
 
Re: Question - firewall grommets

They are in the VB catalog.
 
Re: Question - firewall grommets

I'm pretty sure that British Wiring sells various grommets as well. If you can't get hold of Ed, you can try and call them.
 
Re: Question - firewall grommets

Jack, I thought that anglodesign site you found had a pretty good section for all the grommets etc.

----------
Mike
59 Bugeye
69 Sprite
 
Re: Question - firewall grommets

yep, got em figured out now.

I need eight 5/8", one 1", Grometts and

one 7/8 plug for antana hole and two 5/8 plugs for a couple DPO holes in firewall, think CB maybe.

That will finish me off, about $11 or so.

Oh yea, note in VB catalog that gromets come with two different sizes of holes in the center.
 
Back
Top