• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Question about installing the steering wheel control head?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
The manual states: " The direction indicator switch lever should be in the 12 o'clock position and the vertical lever of the stator tube is at the 6 o'clock position."
What is exactly meant by "the vertical lever of the stator tube"? Seems to me there is a is a slot in the stator tube. Does this slot not face upwards? What is the vertical lever that goes to 6 o'clock?
 
I would suggest that you just look at what is there on the two parts and fit them together to make it so the control head fits into the stator tube slot and the turn signal lever is at 12. There is no lever on the stator tube only the slot.
Charley
p.s. Instructions are only to be used if you can not figure it out by yourself.
 
Back
Top