• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Progress GB

Share this page

GB1

GB1

Yoda
Country flag
Offline
Well we have brakes. and started fabricating the exhaust.

It is going to be 1.75 to get over the header pipe and over RC40 muffler.

This has got to be the biggest pipe I have ever put on a spridget.

Patrick
 
You say no back pressure concerns, hehe.
 
Thanks Jack,

Today the brake fluid resevuor is holding...

Need to flange out the front of the pipe and probably have a pipe welded on the back of RC40. I am thinking that it should point down, to hit the pavement and make more of a thump.

Patrick
 
Back
Top