but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
dbenichou289
Member
Offline
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR2/3/3A Please identify these parts
- Thread starter dbenichou289
- Start date
Share this page
OP
dbenichou289
Member
Offline
Ah, the metal piece attaches with the mirror. For the wood blocks, I will have to take a look to see where it screws into the car...I don't recall seeing a pilot hole in the top of the quarter panel of the car, but then again I wasn't really looking too hard there. Thanks. for the quick reply.
M_Pied_Lourd
Darth Vader
Offline
OP
dbenichou289
Member
Offline
@Tush, thanks for the video link. I found the remainder of your videos and they are extremely helpful...although I am not finding your 1959 triumph tear down part 1 anywhere...found 2-15
@John, thanks for the pics. I found the hole in which the screws to the blocks go into. It's all starting to make sense now
On a side note, I wish someone had told me to install the mirror BEFORE installing the windshield...From the great Homer Simpson...DOH!
@John, thanks for the pics. I found the hole in which the screws to the blocks go into. It's all starting to make sense now
On a side note, I wish someone had told me to install the mirror BEFORE installing the windshield...From the great Homer Simpson...DOH!
M_Pied_Lourd
Darth Vader
Offline
Yes, it looks like I skipped Part 1 although I think that I might have considered getting it started as being Part 1.
Here is the playlist link for the 59 TR3A https://www.youtube.com/playlist?list=PLuiK_kfeY7S0xMKx5Obb16cWsWVye22SW
And, if your interested, for the 60 TR3A. https://www.youtube.com/playlist?list=PLuiK_kfeY7S0w3pyPKXrAdWFQGUjLudDj
Cheers,
Tush
Here is the playlist link for the 59 TR3A https://www.youtube.com/playlist?list=PLuiK_kfeY7S0xMKx5Obb16cWsWVye22SW
And, if your interested, for the 60 TR3A. https://www.youtube.com/playlist?list=PLuiK_kfeY7S0w3pyPKXrAdWFQGUjLudDj
Cheers,
Tush
M_Pied_Lourd
Darth Vader
Offline
I use Matrix Brand Paints and Clearcoat. It’s a Urethane base, still solvent based but low VOC. I use Matrix AG40 For my clearcoat..it’s a European Style, high solid clear.
Cheers,
Tush
Frank Canale
Jedi Warrior
Offline
Found my wooden blocks in a bin . As for the mirror bracket still among the missing. I am a long way from needing either one but these post are a great help as my car was in bad shape and seems detail parts cast aside years ago by the PO. Frank