• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Pinion/Ring Gear Lash

Share this page

MikeAH100M

MikeAH100M

Jedi Hopeful
Silver
Country flag
Offline
Anyone know what the proper amount of movement/lash there should be between the diff pinion gear and ring gear on a bugeye? Removed the diff while I was checking on an axle issue and noticed that I can move the driveshaft flange/pinion about a 1/16" and get a noticeable "click". Both gears look good, no uneven wear, no chips, nice polished appearance. The differential is also very quiet at all speeds - no hum like I have noticed on some other spridgets so I'm thinking the movement is OK but wanted to check in with others who might know more about this.
 
Leave it be. They were set up correctly durring assembly and are now are wear mated to each other. Not making noise? No reason to fix something that's not broken.
 
Thanks. That was my thinking. The previous owner said he had the diff rebuilt so sounds like that whoever did the rebuild knew what they were doing.
 
Back
Top