Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
I've got the Tunebug cleaned up, and took a few pictures for the insurance folks:
https://www.drooartz.com/index.php?page=6
I'm working on the lights right now. Headlights work fine (high and low) but there are some other issues. I want to make sure I understand what the other lights are supposed to do. Here's my understanding:
<ul type="square">[*]Front bullet lights are running lights (working) and turn signals (not working)
[*]Rear large lights are tail running lights (working) and brake/stop lights (not working)
[*]Rear bullet lights are turn signals (not working)
[/list]
Is this correct? I'm going to have to start tracing wires, so I want to make sure I'm aiming for the right functionality. Also, how do I get the bullet lights apart to check the bulbs? Don't want to break anything.
-Drew
https://www.drooartz.com/index.php?page=6
I'm working on the lights right now. Headlights work fine (high and low) but there are some other issues. I want to make sure I understand what the other lights are supposed to do. Here's my understanding:
<ul type="square">[*]Front bullet lights are running lights (working) and turn signals (not working)
[*]Rear large lights are tail running lights (working) and brake/stop lights (not working)
[*]Rear bullet lights are turn signals (not working)
[/list]
Is this correct? I'm going to have to start tracing wires, so I want to make sure I'm aiming for the right functionality. Also, how do I get the bullet lights apart to check the bulbs? Don't want to break anything.
-Drew
