• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Picture request - RB car, chrome rear bumper

Share this page

tosoutherncars

tosoutherncars

Jedi Knight
Offline
Hi all,

a quick request,

I don't think I'll be replacing the rear valence on Milo this year... but I'm not sure I can take the rubber bumpers much longer.

Has anyone simply slapped a chrome rear bumper on a RB car? If so, could I ask for some pictures? I can't decide whether the flat portion under the taillights would drive me crazy or not.

Thanks in advance,
Duncan
 
Yes, that's what I've done.
BillM has seen it in person, so you could ask him how he thinks it looks. I have pictures.

side_newbump.jpg


back_newbump.jpg


after-back.jpg


tail01.jpg
 
Duncan
It is pretty hard to notice the missing parts on Rick's car but then the color does tend to hide it. It is probably OK to just do it and live with it for a while, if it bugs you then later-on you can do something about it. Your car's color would probably hide it too.
Bill
 
I've also seen your fabrication skills with the Rabbit - and think you could wither make something fit or even make a foam fibreglassed buck to fit over and blend in till you get around to changing it all.

I know I posted it elseware but here is the extra bracket my "guy" fabricated to hold the bumper - I went with the split bumpers which I think are way prettier.

https://tinyurl.com/65hpya

I'd say go for it!
 
Thanks very much guys... Yes, I agree with all of the above.

Rick, did you notice a difference in the ride height?

JP, I've got a set of split bumpers (and a set of the early full bumpers) hanging in the rafters, waiting to go on... :smile:
 
Yes, I lowered the front but haven't done anything with the back. I noticed the handling improve without the RB's.
 
RickB said:
Yes, I lowered the front but haven't done anything with the back. I noticed the handling improve without the RB's.
Click to expand...

I took out the spacer blocks at the front of the springs and had the actual springs dearched about an inch - cost me $60 and a couple hours time
 
JPSmit said:
I took out the spacer blocks at the front of the springs and had the actual springs dearched about an inch - cost me $60 and a couple hours time
Click to expand...

Interesting! Did you find it changes the spring rate, makes them less or more stiff?
 
so far nothing to bounce - but, a guy in my club had done it and had no problems
 
Back
Top