• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Spitfire Payen Head Gasket -which way up ?

Share this page

OP
J

Johnny spit

Freshman Member
Country flag
Offline
Hi All,

Can someone please advise me on which way up my Head Gasket should be ? It's an original NOS Payen AK520, for my spit .

I thought it would say TOP ! but all i can see is the AK520 and MADE IN ENGLAND ?

Thanks - John
 
Sort by date Sort by votes
HERE ARE SOME PICS
 

Attachments

  • PIC 1 PAYEN.JPG
    PIC 1 PAYEN.JPG
    2.7 MB · Views: 113
  • PAYEN PIC 2 .JPG
    PAYEN PIC 2 .JPG
    3.1 MB · Views: 122
  • PAYEN PIC 3.JPG
    PAYEN PIC 3.JPG
    2.1 MB · Views: 125
Upvote 0 Downvote
I’m racking my brain, and simply can’t remember what I did! Chances are, the “made in England” should be legible when installing…
 
Upvote 0 Downvote
Some more information - suggesting a similar conclusion, “flat side down” which is the same as writing side up:

TR2/3/3A - head gasket... which way up?!

Moss 690-022. flat on one side, embossed on t'other, but which way up? No markings. Moss tech thinks the flat side is up. Should I use Permatex copper spray if I can get it here in outer Mongolia (aka rural BC)? Rebuilding a broken engine from scratch is such fun: but I need a helper to lift the...
www.britishcarforum.com www.britishcarforum.com
 
Upvote 0 Downvote
Having said what I just said, it looks like you have (as you wrote) an original, no longer made, Payen … the rest of us are using the Bastuck reproductions. Your looks slightly different, and more importantly symmetrical. I’d still go writing side up…
 
Upvote 0 Downvote
I agree Popeye ! I think i will go with the writing up .

I have only just bought the car and 2 miles down the road , the temp was high and steam coming into the cab !!! pulled over open the hood and found a core plug on the block leaking coolant and the head gasket bubbling at the rear end. Took the head off, cleaning it up and found a crack between 3 & 4 chamber.
So i have sourced another head ( big valve ) same as the one i removed. Will get it skimmed and hopefully be ready for rebuild next wkend.

The engine is a short crank GE from a herald, and as there were shims under the rocker, it's probably had a high lift cam along with a rebore etc etc

I'm finding new things everyday, only just found out it has a Type 9 5 speed fitted :smile:

So hoping all will go well when built back up, fingers crossed

Thanks for the support
 
Upvote 0 Downvote
Back
Top