Painting front hubs

[drooartz]

I've cleaned up the front hubs and am wondering what bits get painted on them, if any. These are hubs for disc brakes, disc wheels (from a '74 Midget). Looks like just the outer bit where the studs go in, and not the outside of the shaft.

Words of wisdom?

 

[spritenut]

I paint mine black, lately I have been powder coating them black, just don't paint the face of the rotors where the brakes ride.

 

[JPSmit]

I painted mine a cast aluminum colour

 

[Hap Waldrop]

Use a high heat engine type paint if you're doing rattle can, the rotors transmit a fair amount of heat to the hubs.

 

[drooartz]

I've got some of the cast aluminum high heat paint around, so I'll use that. Can't see the hubs anyways, so the color choice is not that critical.

 

[blkcorvair]

I blasted mine and used some Dupont Brake caliper paint. G2G.