Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Sopwith_Camel
Jedi Knight
Offline
ok I'm putting in a new anti sway bar on a 67 340 (mk2)
and everything is in place but I can't get the nuts on the ends on.
so at each end of the any sway bar there is a drop link (might not be the right term) and it has two polyuratian bushes on over one under. I need to compress the bushes to thread on the retaining nut but no luck.
any tips?
currently I've jacked up the A arm but the lower bush is still not compressed enough to thread the nut
and everything is in place but I can't get the nuts on the ends on.
so at each end of the any sway bar there is a drop link (might not be the right term) and it has two polyuratian bushes on over one under. I need to compress the bushes to thread on the retaining nut but no luck.
any tips?
currently I've jacked up the A arm but the lower bush is still not compressed enough to thread the nut