• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Odd request for engine bay photos

Share this page

A

AlamedaMGB

Senior Member
Offline
On my recently acquired 67 Midget, the radiator was attached with some non-original cotton rope. Yes, rope.. I am trying to get everything straightened out under there.. the Radiator support is in place, but it appears that radiator shrouds that sit to the left and right of the radiator support are bent, and are definitely not bolted to teh radiator support.

Too late to make a long story short, Does anyone have photos of the engine bay taken towards the front? I'd like to see how these are supposed to fit..

You can post here, send me a link, or send me pics. To midget-at-jeffkimble.com

Thanks in advance!
 
Those radiator/inner fender supports are different from left to right. One looks bent, one is real close to a 90* bend.
You do have to pull in on the inner fenders to make em line up with the rad uprights.
 
Yeah, there is one shot on the tergelizer site that is a little helpful, and one listed on ebay that is quite useful, but as they say, a picture is worth a thousand words.


Anyone?

Thanks in advance.
 
Back
Top