Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hello All,
I just wanted to introduce myself to the Forum. I just purchased my 1st project car. I purchased a 1964 AH Sprite with as 1275cc Engine. I will post pics of my progress. Do you suggest I do it on this post or create a separate Thread?
Good news is car runs and seem in pretty good shape.
This is my 1st time doing any sort of project like this so any tips and tricks will be highly appreciated.
Just to give a rundown of what I have done so far.
1. Ripped out all interior ( carpets, seats, etc )
2. Removed Windshield
3. Removing all light
4. Making list of all parts needed for exterior.
Next step is to check engine fully, Check brakes and make sure car is running in tip-top shape. After this. I will remove engine and take to sand blasting to see how much metal will need to be welded and replaced. I do have a good friend who has done similar project before and is assisting and helping direct the project.
Thanks again and I look forward to talking with all of you on the forum.
I just wanted to introduce myself to the Forum. I just purchased my 1st project car. I purchased a 1964 AH Sprite with as 1275cc Engine. I will post pics of my progress. Do you suggest I do it on this post or create a separate Thread?
Good news is car runs and seem in pretty good shape.
This is my 1st time doing any sort of project like this so any tips and tricks will be highly appreciated.
Just to give a rundown of what I have done so far.
1. Ripped out all interior ( carpets, seats, etc )
2. Removed Windshield
3. Removing all light
4. Making list of all parts needed for exterior.
Next step is to check engine fully, Check brakes and make sure car is running in tip-top shape. After this. I will remove engine and take to sand blasting to see how much metal will need to be welded and replaced. I do have a good friend who has done similar project before and is assisting and helping direct the project.
Thanks again and I look forward to talking with all of you on the forum.
