-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
MGB new project car 67 mgb
- Thread starter bob67bgt
- Start date
Share this page
Re: new project car 67 mgb
Also I use a liquid masker to keep overspray off the bits already installed. I was using a 3M product but found "Slime". Some use it to keep overspray off the paint booth but it also works great for the engine bay,underbody and suspension thats already installed. You still have to mask it off but it sure saves clay bar work when that nasty overspray creeps under the masking paper. It cleans up with water. The 3m product was corrosive if left on for long periods of time and this stuff may be the same. You can pull it off like bad sunburned skin but water is a easier cleanup. bob
Also I use a liquid masker to keep overspray off the bits already installed. I was using a 3M product but found "Slime". Some use it to keep overspray off the paint booth but it also works great for the engine bay,underbody and suspension thats already installed. You still have to mask it off but it sure saves clay bar work when that nasty overspray creeps under the masking paper. It cleans up with water. The 3m product was corrosive if left on for long periods of time and this stuff may be the same. You can pull it off like bad sunburned skin but water is a easier cleanup. bob
Re: new project car 67 mgb
Here is a update on the 67 project car. I have taken some time away from the car. The engine is built, carbs almost finished, exhaust just needs 2 more clamps, and the dash is wired. Seats are done but not installed yet. I guess its time to get back at it. Bob
Here is a update on the 67 project car. I have taken some time away from the car. The engine is built, carbs almost finished, exhaust just needs 2 more clamps, and the dash is wired. Seats are done but not installed yet. I guess its time to get back at it. Bob
