• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Need TR4-A trunk lid emblem location?

Share this page

M

moe_morin

Member
Country flag
Offline
I'd like to know where the TR4-A emblem is located on the trunk lid. Would appreciate the dimensions from the side and bottom edges, or a layout pattern, if someone has one.

Thanks, Moe Morin
 
I have a solid axle TR4A that is completely disassembled for restoration. There are two holes in the trunk lid for the "TR4" and two holes for the "A". The two holes for the "A" are 4-1/8" from the right edge of the trunk, and 6-1/4" and 6-7/8" up from the bottom edge. The bottom hole for the "TR4" is 1-1/8" to the left of the bottom "A" hole (oops!) which puts the upper "TR4" hole about 3-15/16" away on center. That hole is also 8-1/8" to the left of the right edge of the trunk.

If none of the above is completely clear to you I would be happy to trace a pattern for you and mail it along before you drill. Just send a pm.

Best regards,

Brian
 
Back
Top