• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Need Photo of DS Wiring Harness Route '71 TR6

Share this page

R

Renoman

Senior Member
Offline
I'm reassembling my '71 TR6 and am about to put the DS kick panel in but I can't figure out how the wiring harness is routed behind the kick panel. Does anyone have a picture of how the branch harness that goes to the rear of the car routes down the driver's side kick panel. The wiring and connector seems to just sit about halfway down the panel between the door opening and the highbeam switch. The wiring harness branches off right next to the hood release and the harness natural bend seems to interfere with the hood release handle. If I had a picture it would help me to route the harness correctly. Thanks in advance.

Art
 
Back
Top