• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

T-Series Need new jet levers

Share this page

T

Tony P

Member
Offline
Friend has a TD and his jet levers are worn out and the carbs are hard to adjust. At about $90 each is it possible to drill them round and install brass bushings. Or does anyone have a set that good or very slightly worn. We want to get his car running.

Thanks

Tony P
 
If you have the skill and tools, there's no reason why you couldn't drill out the holes and press or solder in a bushing. I do this all the time with various automobile bits and pieces.
 
Dave, I will take a look at the site you sent me. The price seems better and the advice on the car is what I was looking for. Steve, I do have a friend that does have the tools and the skill, I am sure he will help me out.

Thank you both for your input.


Tony P
 
Back
Top