Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
zimmy
Jedi Knight
Offline
my clutch up-date
i got a rebuild kit for my master cylinder
and it turns out its the wrong kit, even
though i ordered the right one for my
"unmarked" casing....mine isnt the "cup"
type seal, but the thinner one...
so ,today i took out the "new" seal and put
the old one back in, bleed it by holding
the master up far as it would go and pumped
the air out, and the clutch works
, but fades after a few seconds...
i noticed pumping it up helped somewhat.
it also makes a "click" sound sometimes.....
im assuming i still need a master kit....
any suggestions? ......z
i got a rebuild kit for my master cylinder
and it turns out its the wrong kit, even
though i ordered the right one for my
"unmarked" casing....mine isnt the "cup"
type seal, but the thinner one...
so ,today i took out the "new" seal and put
the old one back in, bleed it by holding
the master up far as it would go and pumped
the air out, and the clutch works
, but fades after a few seconds...
i noticed pumping it up helped somewhat.
it also makes a "click" sound sometimes.....
im assuming i still need a master kit....
any suggestions? ......z
