• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Mini drive shaft nut size.

Share this page

T

timbott

Freshman Member
Offline
Does anyone know what size the nut is on the hub end of the drive shafts on a 1986 Mini. I reckon it is 34mm but don't want to go and buy a stonkin' big socket like that and buy the wrong size:eek: Thanks.

cheers, Tim
 
Even though you're talking about a "late" Mini, the nut should be Imperial/Inch, not metric. The nut size is 1-5/16".
 
1 5/16 is the correct size for all drive shaft bolts I have used...
Word to the wise, dont try to match metric equivelants on your engine pieces...if you round off a bolt/nut it's a royal pain to get it off again.
 
Back
Top