• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Midget A Arm / Spindle Rebuild

Share this page

Monark192

Monark192

Jedi Warrior
Offline
I have some used parts to upgrade my 62 Midget to disk brakes. Everything is stripped but I cannot remove the spindle - the pin that holds the spindle to the fulcrum just won't budge. Is there anyone that rebuilds the front a-arms?
 
those pins are generally always stuck. Thin cut off wheel works. I beleive a few folks here do indeed know of some good rebuilt a arm souces. Sure they'll chime in
 
Front End Rebuilds

Eric Jones in
Delaware Ohio (740) 363-2203
 
No.... and beginning around Thanksgiving, he'll be on an island somewhere between France and Iceland. Running some rallye, no doubt. Call him.

Peter C.
 
Thanks all - I have spoken with Eric and the parts are on their way. I caught him before he flew off to compete in the LeJog in an Escort RS2000. He is another supper nice guy in this hobby of ours.
 
Pete C
any other people who rebuild/rebush king pins/spindles for Spridgets someone you would use or recommend?
 
I'll second the recommendation for Eric Jones. He provided rebuilt A frames for my BE project that look great. He was also pretty reasonable on a rebuilt gearbox.
 
Back
Top