• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB MGB w/Isuzu V6 need help

Share this page

bcliff

bcliff

Jedi Warrior
Country flag
Offline
I'm working on an MGB V6 conversion for a friend. It has an Isuzu 3.2L V6 in it. Runs great, jut a few small details left. The most important one is WHERE in the world does the oil dipstick go? Can't find anywhere you might put one. There is a small, square headed plug down low on the left side of the engine. Could that be where the tube goes? Anybody out there have any experience with this motor. It is supposed to be the same or similar to a GM engine. Any help will be appreciated.
Bruce
 
Back
Top